Tests of Damen's ballast water port solution successfully completed
Damen Shipyards Group announced that the InvaSave technology has completed shipboard testing onboard the Henrike Schepers.
During the shipboard tests, ballast water was taken in untreated and the efficacy of the technology was validated upon discharge. These tests have shown that the InvaSave is capable of providing an IMO type approved backup in a port in the event of a failure in a vessel’s on board treatment systems to uptake or discharge ballast water. It can even serve as a port-based alternative for those ship owners that may not want to retrofit an on board treatment system or be deployed in a port with a sudden outbreak of marine pests.
First port with ballast water treatment service
Groningen Seaports is the first port to provide this ballast water treatment service. “Our location on the Wadden Sea means that we have a responsibility to push forward the progress of sustainable shipping,” comments Groningen Seaports Sustainability Coordinator Bart van der Kolk. “We are fully prepared for the ratification of the IMO Ballast Water Management Convention. This project wouldn’t have been possible without the effort of some frontrunners like Royal Wagenborg, Van Gansewinkel, Imares, MEA-nl and Damen.” The innovative solution is likely to appeal to other ports as well as ship owners, operating close to sensitive locations such as World Heritage Sites and Particularly Sensitive Sea Areas.
IMO's Ballast Water Management Convention
“More and more countries are ratifying the IMO’s Ballast Water Management Convention (BWMC) and it could enter into force in 2017; in any case, it is only a matter of time. Damen is cooperating with the service providers in the ports to provide this ballast water treatment service. This is also relevant for all port authorities, who could face congestion problems if they don’t have a contingency/emergency service in place,” said Damen Green Solutions Product Manager Matthijs Schuiten.
The results of the InvaSave test meet the D2-Standard of the IMO Ballast Water Management Convention on all aspects. This includes the test series conducted with the high sediment waters of the River Hull and the River Thames, UK. An overall and important principle is that the system is robust, and works under all relevant circumstances, regardless of the composition of the ballast water. Test protocols are in line with IMO BWMC test guidelines and additional requirements of the Dutch flag state. All testing was conducted by MEA-nl.
Damen can deliver the InvaSave technology in a self-sufficient mobile container, which can be put onboard a service barge or moved around the port on a trailer or a pontoon. The system uses innovative filtering and UV technology and does not contain chemicals or hazardous substances.
IMO type approval is expected to be obtained 2016 and a patent is pending.
This news item was originally published on the website of Damen Shipyards Group.
Read also on this website
- Damen's mobile InvaSave almost ready for port-based treatment of ballast water, 22 January 2016
- Damen DOP dredger shipped high up in the Andes to clean up reservoir in Peru, 15 April 2016
- Damen delivers first LoFlo ballast water treatment system for Dutch navy support ship Mercuur, 21 December 2015
Nijkerk, the Netherlands
+31 33 247 40 40